高電圧差動プローブ、オシロ用プローブ、高電圧プローブ、probe、ケイテック

高電圧差動プローブ（2）　　　　　2011-9

---ページ更新/改定中---
● 高電圧プローブ新ページへ
● 差動プローブ（高電圧、低電圧）新ページへ
● 高電圧プローブ（DMM用、自動車イグニッション観測用）新ページへ
■ PINTEK社高電圧プローブ/差動プローブへ　　　■ PMK社高電圧プローブへ

ADF25A　高電圧差動プローブ
入力耐圧１４００Vdc+peakAC,1000Vｒｍｓ、DC-25Mｈｚ（２０Mhz)、１０：１，１００：１

ADF25A

ADF25A+付属品付

Specifications Probe Kit (includes probe, power supply, assorted clips, carrying case)

Input Voltage Max. Differential	± 70V DC inc. Peak AC@10:1 or 50V RMS 　± 700V DC inc. Peak AC@100:1 or 500V RMS
Common Mode Max.	± 1400V DC inc. Peak AC or 1000V RMS
CMRR (typical) 50Hz 20KHz 200KHz	高CMRRで外乱ACラインノイズも除去：差動プローブの機能発揮大　-85dB 　-66dB 　-56dB
Bandwidth	100x setting: DC -25MHz (-3dB) 　10x setting: DC -20MHz (-3dB)
Accuracy	± 2%
Rise Time	100x setting: <=14ns 　10x setting: <=18ns
Input Impedance	4MΩ /10pF each side to GND 　8MΩ /5pF between inputs
Output Voltage	± 7V (minimum 2KΩ load)
Offset (typical)	< ± 5mV (-10°C to +40°C)
Noise (typical)	1.5 /2mV
Output Source Impedance	1Ω @ 1KHz, 8Ω @1MHz;
Operating Temperature	-10 °C to 40 °C
Power Requirements	4 AA cells or 6V DC/60mA power supply　AC100Vアダプタ付属
Input Leads	45cm double insulated PVC terminated in 4mm safety plugs
Sprung Test Hooks	1 red, 1 black sprung hook
Output Cable	95cm RB58 C/U terminated with standard BNC plug
Weight (w/o batteries)	0.62lbs (285g)
Dimensions	6.6" x 2.4" x 0.8" (166mm x 62mm x 20mm)
IEC 1010 Compliance	Category III
Country of origin	Made in U.S.A　By Link Instruments
価格￥消費税込　　　　**納期	￥７8,750　　付属品、ケース付　　納品まで１０日から2週間程掛かります　 ADF25C：DC-70Mhz､１００：１．１０００：１， 7000Vモデルもあります **

DP01シリーズ　高電圧差動プローブ（高精度、高周波、高CMRR差動プローブ）

DP01-10K：100MHz, 10000:1, 1%, 105dB,　8KV RMS, 12KV Peak

DP01

DP01+付属品付

Specifications (probe, power supply, assorted clips, carrying case)

Input Voltage　　Max. Differential	± 12,000V DC inc. Peak AC or 8,000V RMS
Common Mode Max.	± 6,000V DC inc. Peak AC or 4,000V RMS
CMRR (typical) 100Hz １00KHz 10MKHz	-105dB -105dB -95dB
Bandwidth　Atten	DC -100MHz (-3dB)　　10,000：1
Accuracy	± 1%
Rise Time	10,000：1　　3ns
Input Impedance	10MΩ　(dc-10Khz)
Output Voltage	± 1.75V (50Ωload)
Offset (typical)	±600uV
Noise (typical)	10uVrms
Output Source Impedance	50Ω
Operating Temperature	-40C to 85C
Power Requirements	4 AA cells or 5.5V DC/100mA power supply
Input Leads	4mm safety plugs
Sprung Test Hooks	1 red, 1 black sprung hook
Output Cable	50Ω BNC cable
Weight (w/o batteries)	750g
Dimensions	130mm x 56mm x 130mm
IEC 1010 Compliance	Category III
Country of origin	Made in China　by　CIC research
価格￥消費税込　　　　**納期	￥33０，０００　　付属品、ケース付　　**納品まで１０日から2週間程掛かります
このシリーズでは他にDP０1-1K、DP０1-1K-LVC、DP01-10K-LVCがあります。

Tektronix　P5200シリーズ　高電圧差動プローブ
Specifications	P5200	P5205	P5210
Bandwidth (-3 dB)	25 MHz	100 MHz	50 MHz
Differential Mode Voltage (RMS or DC) (between positive and negative input leads)	1000 V CAT II	1000 V CAT II	4400 V
Differential Mode Voltage (Peak) *¹ (between positive and negative input leads)	1300 V	1300 V	5600 V
Common Mode Voltage (RMS or DC + Pk AC) (between positive lead and ground or negative lead and ground)	1000 V CAT II 600 V CAT III	1000 V CAT II 600 V CAT III	2200 V CAT II 1000 V CAT III
Attenuation (switchable)	50X/500X	50X/500X	100X/1000X
CMRR @ 60 Hz/1 MHz (typical)	80 dB/50 dB	80 dB/50 dB	80 dB/50 dB
Input R (each input)	4 MΩ	4 MΩ	8 MΩ
Input C (each input)	7 pF	7 pF	7 pF
Power Source	AC wall adapter(ACｱﾀﾞﾌﾟﾀ）	TEKPROBE Power Supply
Safety (all)	UL3111-1/CSA1010.1/CSA1010.2.031/IEC61010-2-031/EN61010-2-031
Compatible Products 最新のTek社オシロはプローブ用DC電源が内蔵されています。外部電源Tek1100シリーズを使えば他のオシロにも使えます。	ALL*³	TDS400/500/600/700/ TDS3000B/5000B/6000B²/7000B²/ CSA7000B*² and 11000 Series	TDS400/500/600/700/ TDS3000B/5000B/6000B²/7000B²/ CSA7000B*² and 11000 Series
価格￥消費税込　￥お問い合わせ下さい	￥84,800	￥127,000	￥254,000

*¹ The RMS value of the waveform shall not exceed the Common Mode Voltage (RMS) for either lead.
*² TDS7154B, TDS7254B, TDS7404B, TDS6404, TDS6604, CSA7154, and CSA7404B require a TCA-1MEG Buffer Amplifier.
*³ WARNING: For safe operation, do not use the P5200 High Voltage Differential Probe with oscilloscopes that
have floating inputs (isolated inputs), such as the Tektronix TPS2000 series oscilloscopes and THS700 series oscilloscopes.
The P5200 High Voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.

P5200	P5205	P5210

▲ probe-top　　■ お問い合わせメールへ